Special Offers


Enhancing your comfort while keeping costs in line is always the focus at Accurate Air. Check out our current specials.



Per System

Get ready for the changing weather with our 20-point fall inspection of your cooling system at a budget-friendly price.

Air Conditioning Inspection Checklist*

  1. Check thermostat operation and accuracy

  2. Clean filter or replace (customer supplied)

  3. Check and document system temperature split

  4. Check and document superheat and sub cool

  5. heck and document operating pressures

  6. Inspect electrical disconnect

  7. Inspect wiring and tighten electrical connections

  8. Inspect contactors, relays, and circuit boards

  9. Check capacitors and start components

  10. Inspect and test safety switches and devices

  11. Check voltage and amperage of all motors and compressor

  1. Inspect indoor blower and motor for dirt build up

  2. Inspect bearings and lubricate all moving parts (as required)

  3. Inspect belt and adjust tension (as required)

  4. Inspect condensate pan and flush the drain line (if cleaning is required, contractor will provide a quote if additional charges apply)

  5. Inspect outdoor coil and advise customer of condition

  6. Inspect indoor coil and advise customer of condition (only if accessible and won’t disturb any seal on the cabinet)

  7. Inspect duct seal at unit and secure panels

  8. Explain and document all necessary repairs

  9. Run and test system

INSPECTION RESULTS (temperature split, operating pressures, recommendations, etc.)
*As per Arizona Heat Pump Council guidelines