Skip to content
Brands We Serve

HVAC Brands We Service and Install Across Tempe, Scottsdale & the East Valley

One Family Crew That Has Worked On Nearly Every System in the Valley

Trane, Carrier, Goodman, or a brand no warehouse stocks anymore- our salaried technicians have opened it up, sorted it out, and kept it cooling. We service almost every home HVAC brand across the Valley, and we install three of them new.

Serving Tempe, Scottsdale, Mesa, Chandler, Gilbert, Queen Creek, and the wider East Valley.

  • Family-owned since 1965
  • NATE & EPA certified
  • Factory-authorized Trane & Lennox
  • BBB A+, 400+ five-star reviews

Book a visit

NATE-Certified Technicians EPA-Certified BBB A+ Rated Factory-Authorized Trane Dealer Authorized Lennox Dealer Mechanical Trade Contractors of Arizona ROC# 059025 Residential ROC# 068484 Commercial Salaried, Never Commissioned Flat $109 Diagnostic
Repairs

Can We Fix the Brand You Already Have?

Almost always, yes.

Trane, Lennox, Carrier, Goodman, Amana, Rheem, Ruud, York, Daikin, American Standard, Bryant, and Mitsubishi Electric ductless units all pass through our schedule, and that is only the short list. As long as the manufacturer still makes the part, we can usually source it and get your system cooling again.

New installs are the one place we draw a line. We fit Trane, Lennox, and RunTru, the lines we hold factory authorization for, and every other brand we maintain and repair rather than sell. Ready for a fresh system? We will match your old unit to a comparable model from those three and put the quote in writing.

The one job we turn down is hunting parts for equipment a manufacturer has already discontinued, since a fix we cannot warranty does you no favors.

Brands

Which of These Six Is Cooling Your Home?

Six names show up more than any other in East Valley homes, on rooftop package units, in closet air handlers, and out on the side-yard slab. We fit three of them new and repair all six, and each card flags which is which. A dedicated page for every brand is on the way, digging into its common failures and whether a straight swap pays off.

  • Trane

    A line we both install and hold factory authorization for. Trane runs heavy and lasts, and it is not unusual to find one carrying a Valley home well into its second decade.

    Trane keeps parts in circulation for years, so fixing an older unit often beats replacing it.

    Trane repair and installation

  • Lennox

    Our second factory-authorized install line. Lennox chases efficiency harder than most, so its premium tiers sit near the top of the SEER2 charts.

    Many Lennox components are brand-specific and shipped in rather than stocked locally, so we tell you the lead time up front.

    Lennox repair and installation

  • RunTru

    The value badge we install, built by Trane itself. You get much of the same engineering and parts pipeline at a friendlier price.

    It turns up often in newer subdivisions, where builders wanted something dependable without paying for the flagship tier.

    RunTru repair and installation

  • Carrier

    A brand we repair and maintain rather than sell. Bryant and Payne roll off the same production line, so we can often cross-reference a part even for a discontinued Carrier cabinet.

    Carrier more or less invented residential air conditioning, and its units sit outside homes all over the Valley.

    Carrier repair and service

  • Goodman

    Another we keep alive rather than install. Its parts are inexpensive and easy to find, so a Goodman repair pencils out long after other shops would push a full replacement.

    Amana and Daikin now share its parent company, which means components travel across all three brands.

    Goodman repair and service

  • American Standard

    We handle repairs and upkeep on this one without fitting it new. It shares a factory with Trane, so under the cover, the two are practically twins.

    That common design makes it quick to diagnose, and Trane parts drop straight in.

    American Standard repair and service

Plus every other brand we keep running: Amana · Bryant · Daikin · Day & Night · Heil · Maytag · Mitsubishi Electric · Payne · Rheem · Ruud · Tempstar · York

Missing your brand here does not mean we skip it. Give us the model number stamped on the data plate and we can confirm coverage in a single phone call.

Model & Serial

Not Sure What You Own? Two Numbers Settle It

No idea which brand is sitting on your roof? That is a common call, and no problem at all. A pair of numbers printed on the equipment answers most of what we need, and finding them takes a minute or two.

  • Where the numbers hide

    Look for the data plate, a metal label on the side of the outdoor condenser, plus a matching one inside the furnace or air handler cabinet. On most Valley homes that means the rooftop unit or a hall closet. Snap a photo of each and the hunt is over for good.

  • What the model number gives away

    Its middle digits typically spell out the capacity in tons, and one ton is a measure of cooling output, not how heavy anything is. The remaining characters flag the efficiency tier. Read together, they show whether the system was ever sized correctly for your square footage.

  • What the serial number gives away

    Tucked inside that string is the manufacturing year, and nothing else on the unit matters more for deciding repair versus replace. A 2008 compressor and a 2020 one lead to very different advice, no matter what name rides on the cabinet.

Give our Tempe technicians those numbers over the phone, and we can usually pin down what your system needs before we roll a truck. Every manufacturer codes its numbers differently, so we verify rather than assume.

Our Standards

Make Any Installer Prove These Three Things

Replacing your air conditioner is a big decision, and a good quote should do more than show a model number and a price. Before you sign anything, make sure the contractor can answer three simple questions: Is this the right size? Are the components matched? And will it actually be set up correctly?

  • The System Was Sized for Your Home, Not Pulled From a Guess

    A bigger air conditioner is not automatically better. Your home needs the right amount of cooling based on factors like square footage, insulation, windows, and sun exposure.

    Ask for the load calculation behind the recommendation. This room-by-room evaluation shows how much heating and cooling your home actually needs. Skipping this step can lead to short cycling, uneven temperatures, higher energy bills, and unnecessary wear on your new system.

  • The Indoor and Outdoor Units Were Designed to Work Together

    Your new air conditioner is not just one box sitting outside. The outdoor unit and indoor coil are a matched system, and their efficiency rating only applies when those components have been tested together.

    A professional contractor should provide the model numbers and matching AHRI certificate. This confirms the system combination was tested to perform as advertised, helping protect your efficiency rating and warranty coverage.

  • The Installation Was Finished With the Details That Matter

    Even the best equipment can underperform if it is not installed correctly. The final setup matters just as much as the system you choose.

    Ask whether the installer checks refrigerant levels, airflow, and temperature readings during startup. This commissioning process confirms the system is operating the way the manufacturer intended, instead of simply being turned on and left behind.

A quality replacement should come with answers, not assumptions. At Accurate Air, our system sizing and replacement quotes are designed to help you compare options with confidence. Thinking about a new heat pump instead? The same questions apply before making your decision.

Rebates

How Much Can a New System Earn Back?

A fair amount for some households, less than the ads imply for others. What the money tracks is the efficiency rating of the equipment, not the brand on the label and not the company that sold it. Here is the honest 2026 picture.

Begin with the incentive that lapsed, since it is the figure still floating around kitchen tables. The federal tax credit worth up to $2,000 on a heat pump ended on December 31, 2025, and anything installed in 2026 falls outside it, no matter what an older article promises. Better you learn that from us than after the budget is set.

Everything still on the table depends on who sends your power bill, and around here that is not obvious. The boundary between the two utilities was drawn back in 1955 and ignores city limits, so one neighbor qualifies while the next street over does not. Salt River Project customers still have rebates to claim. Arizona Public Service ended its residential equipment rebates on January 1, 2026, so an APS home has nothing to recover on the hardware itself at the moment.

What the flashiest ads gloss over. The eye-catching manufacturer rebates almost always carry a catch: you buy through that maker’s own dealer network. Because we hold Trane and Lennox authorization, we can layer those in on the lines we install whenever a promotion is live. Utility and state dollars play by different rules, keyed to the equipment’s rating and indifferent to who turns the wrenches. We size and price the job to clear the rebate threshold, then send you off with the invoice and AHRI paperwork each program wants. Since SRP resets its Cool Cash tiers from one program year to the next, we quote whatever is live the week you sign, never a number scraped off a stale page.

  • SRP Cool Cash

    If SRP powers your home, its Cool Cash program rewards a high-efficiency upgrade, paying by the ton and by how the equipment stages, up to around $1,125 on a five-ton variable-capacity system. An Arizona-licensed contractor has to handle the install, and single-stage units need a load calculation submitted with the paperwork.

    Based on: the AHRI-rated efficiency and size of your new system

  • Efficiency Arizona (income-qualified)

    Households that meet the income thresholds can tap the state-run Efficiency Arizona program for a sizable heat pump rebate, with the amount climbing as income drops and shifting with the equipment chosen. It layers on top of SRP Cool Cash, so a qualifying home draws from both.

    Based on: equipment type, efficiency rating, and household income

Still short of your number? Financing can stretch the cost across manageable payments for approved buyers.

Straight Answers

Brand Questions Valley Homeowners Ask Us Most

Yes, both, all over the East Valley. We repair and maintain them even though our new installs run other brands, and parts for supported models usually arrive within a day or two.

No. Our new installs are limited to Trane, Lennox, and RunTru, the lines we are authorized to fit. We will gladly spec a comparable, equally efficient option from those three.

Absolutely, and the bulk of what we service came from somebody else. Whatever parts warranty the manufacturer attached travels with the unit, and we walk you through filing a claim.

Not at all. Your ductwork and cooling load matter far more than keeping the old nameplate. We price a matched swap and a brand change side by side, so the call stays yours.

The right answer comes from your house, not our preferences. Square footage, ductwork, budget, and how long you plan to stay all weigh more than any logo on the cabinet.

Send Us Your Model Number and Skip the Guesswork

Read the model and serial digits off your data plate to us, and more often than not we can name the likely fix before a technician ever loads the van. Every repair opens with one flat diagnostic charge, quoted before we touch a thing.

Accurate Air, family-owned in Tempe since 1965, serving Tempe, Scottsdale, Mesa, Chandler, Gilbert, Queen Creek, and the East Valley. Arizona ROC 059025 (residential) and ROC 068484 (commercial).

Call Us Book Now